SINGLE AXIS, SLOPED TOP, MODULAR VIBRATION SWITCH BOX, STAINLESS STEEL ENCLOSURE, NEMA 4X (IP66) RATED, INCLUDES SSB-MOD(X) FOR 1 TO 12 SINGLE OUTPUT SENSOR INPUTS
- Enclosures with DIN rail mountable modules for multiple inputs and a switched output
- Internally earth grounded for noise reduction
- -58° to 180°F (-50° to 82°C) Temperature Range
SSB6000 Stainless Steel Sloped Top Modular Switch Box
The SSB6000 Series Sloped Top stainless steel modular switch box is used to convert the two-conductor input wiring of up to 12 remotely installed single axis accelerometers or piezo velocity sensors to a switched BNC and a switched two-pin MIL spec connector for data collection. Input wiring from each sensor is connected to the outputs via spring cage or screw terminal blocks on the bottom of the module. Each terminal block includes inputs for signal/power, common and shield. The shield drain wire is earth grounded via the stainless steel enclosure. Additionally, the SSB6000 series can be equipped with online expansion terminal strips, which can be selected upon ordering. While the channel count of standard SB or JB switch boxes can not be modified after purchase, SSB6000 boxes offer the flexibility to add channels at a later date (if less than 12 inputs are required for initial install). Simply purchase additional terminal blocks and plug them into the bottom of the module to add channels. The SSB6000 series may also be equipped with online expansion terminal strips, which can be selected upon ordering.
Rated for NEMA 4X (IP66), the SSB6000 Series can withstand harsh environments including temperatures ranging from -58 to 180 °F (-50 to 82 °C). The box is also resistant to hose directed fluid and corrosion. A twist lock is installed on the door allowing the box to be sealed from the elements when not in use.
